EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE

EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE

Blog Article

The EPEVER Tracer AN Sequence Photo voltaic Charge Controller is often a extremely productive photo voltaic controller suitable for off-grid solar techniques. Based upon multiphase synchronous rectification technologies, it assures optimized Strength conversion and process balance for an array of photovoltaic (PV) programs.

Important Options with the EPEVER Tracer AN Series Controller
The Tracer AN sequence utilizes EPEVER Solar Demand Controller technologies for outstanding solar Vitality harvesting. Key characteristics involve:

Multiphase Synchronous Rectification (MSR) for enhanced energy conversion.
Innovative MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for Increased battery everyday living.
LCD Screen with actual-time knowledge monitoring.
A number of Load Handle Modes like guide and timer.
Extensive Electronic Protections against overcharging, over-discharging, short circuits, and reverse polarity.
Move-by-Phase Guidebook to Putting together the EPEVER Tracer AN Sequence Controller
1. Unboxing and Getting ready the Controller
Make sure all components are included: Tracer AN device, temperature sensor, interaction cables, and consumer manual.
Verify the product selection and voltage rankings match your solar panel and battery specs.
2. Mounting the Demand Controller
Pick out a properly-ventilated, dry area close to the battery lender.
Protected the Tracer AN controller using the offered mounting brackets.
Preserve proper clearance for warmth dissipation.
three. Wiring the Solar Charge Controller
Warning: Generally comply with appropriate safety protocols and make sure the process is driven off prior to connecting Read more components.

Move one: Link the battery terminals to the demand controller (constructive to optimistic, unfavorable to negative).
Move 2: Join the solar panel array to the PV enter terminals.
Phase 3: Connect the load terminals if employing a direct load link.
Action four: Double-Check out all connections for polarity and tightness.
four. Configuring the Controller Options
Electrical power around the controller by connecting the battery to start with.
Make use of the LCD Display screen to navigate the options menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Guide, timer, light Regulate.
5. Monitoring and Details Logging
The Tracer AN Sequence supports real-time checking utilizing the MT50 distant meter.
Knowledge may be logged by means of the RS485 communication port utilizing software including Solar Station Computer system.
Distant checking is possible While using the EPEVER WiFi module.
6. Troubleshooting Typical Challenges
Problem one: No Electricity Output

Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Problem two: In excess of-Voltage Protection

Verify the photo voltaic array’s voltage score.
Alter method parameters if necessary.
Challenge 3: No Battery Charging

Inspect PV wiring for continuity.
Verify MPPT configurations from the menu.
Benefits of the Tracer AN Sequence with MSR Technologies
The multiphase synchronous rectification know-how guarantees:

Bigger Performance: Diminished energy losses through conversion.
Enhanced Dependability: Secure overall performance underneath variable loads.
For a longer time Battery Everyday living: Steady and accurate charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification know-how is definitely an Extraordinary option for optimizing solar power era and increasing battery lifestyle. By adhering to the above mentioned setup guidebook, buyers can make certain utmost performance and method longevity.