EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Collection CONTROLLE

EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Collection CONTROLLE

Blog Article

The EPEVER Tracer AN Sequence Photo voltaic Cost Controller is often a very economical photo voltaic controller designed for off-grid solar systems. Determined by multiphase synchronous rectification engineering, it assures optimized energy conversion and technique security for a wide array of photovoltaic (PV) apps.

Essential Characteristics with the EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Solar Charge Controller technologies for exceptional solar energy harvesting. Important characteristics contain:

Multiphase Synchronous Rectification (MSR) for improved Strength conversion.
Highly developed MPPT Algorithm with >99% performance.
Dual-Stage Charging for Increased battery lifestyle.
LCD Screen with true-time details monitoring.
A number of Load Command Modes like guide and timer.
Thorough Digital Protections against overcharging, in excess of-discharging, brief circuits, and reverse polarity.
Phase-by-Action Tutorial to Putting together the EPEVER Tracer AN Collection Controller
1. Unboxing and Preparing the Controller
Make certain all elements are integrated: Tracer AN device, temperature sensor, conversation cables, and consumer manual.
Verify the product selection and voltage scores match your solar panel and battery specifications.
2. Mounting the Charge Controller
Decide on a properly-ventilated, dry area close to the battery bank.
Protected the Tracer AN controller utilizing the furnished mounting brackets.
Retain suitable clearance for heat dissipation.
3. Wiring the Solar Demand Controller
Warning: Usually comply with right basic safety protocols and make sure the system is powered off right before connecting parts.

Phase 1: Connect the battery terminals on the demand controller (favourable to positive, damaging to visit here adverse).
Step two: Join the photo voltaic panel array on the PV input terminals.
Phase 3: Connect the load terminals if using a immediate load connection.
Step 4: Double-Examine all connections for polarity and tightness.
4. Configuring the Controller Configurations
Ability to the controller by connecting the battery 1st.
Use the LCD Show to navigate the options menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Handbook, timer, mild Management.
5. Monitoring and Facts Logging
The Tracer AN Sequence supports actual-time checking using the MT50 distant meter.
Info is usually logged by means of the RS485 conversation port working with software package like Solar Station Computer.
Remote monitoring is achievable Using the EPEVER WiFi module.
6. Troubleshooting Prevalent Concerns
Problem one: No Electric power Output

Test battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue 2: Over-Voltage Defense

Confirm the solar array’s voltage ranking.
Change program parameters if essential.
Problem 3: No Battery Charging

Inspect PV wiring for continuity.
Confirm MPPT options from the menu.
Benefits of the Tracer AN Sequence with MSR Technologies
The multiphase synchronous rectification technological know-how guarantees:

Greater Effectiveness: Reduced Strength losses throughout conversion.
Improved Trustworthiness: Stable overall performance beneath variable masses.
For a longer period Battery Daily life: Consistent and exact charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological know-how is undoubtedly an Remarkable option for optimizing solar energy era and increasing battery everyday living. By following the above set up information, end users can make certain greatest efficiency and technique longevity.